In e-beam mode the electron beam is extracted
in air and the sample/DUT is at 0.5-6cm from the exit
window. Dose is controlled by the current in the last beam-pipe
magnet. The exit window is 4.5cm in diameter, defining the present
exposure area (~15cm2) at the exit window.
Demonstrated dose rate in e-beam testing with good uniformity
over 15cm2 is ~5x1013 Rad (C)/s.
Idaho Accelerator Center
1500 Alvin Ricken Drive
Pocatello, ID 83201
Phone: (208) 282-5877
Fax: (208) 282-5878
Content Copyright
Idaho State University and Idaho Accelerator
Center.
For questions about the web site design or implementation, please contact
us.
